Welcome Penningtonskates Short track

1. Carbon fiber material for the boot shell.
2. Waterproof synthetic leather. The distance between the front and rear screw holes on the sole is 16.5CM.
3.  The collar design fits snugly around the ankle.
4.  Seamless synthetic leather lining with no stitching on the main body.
5.  Soft material for the shoelace holes, ensuring a tight fit around the ankle.
6. Screw holes at the front and back of the sole for attaching the ice blade, 35-47 sizes with a standard international hole spacing of 165MM, 31-34 sizes have a hole spacing of 150MM for ice blade attachment.
7. Suitable for mounting all standard international ice blades.
8.  Sizes available: 32-45.

1. Fiberglass molded shoe sole, providing high torsional strength, durability, and lightweight.
2. Synthetic fiber leather upper, 1.2mm thickness. Resistant to low temperatures, waterproof, and non-deforming.
3. Entire synthetic fiber leather lining without stitching, offering a seamless interior.
4. Soft material for shoelace holes, ensuring a snug fit around the ankle.
5. 7 screw holes at the front and back of the shoe for connecting ice skates. Standard international hole spacing of 165mm for sizes 35 to 47. Hole spacing of 150mm for sizes 31 to 34 to install ice skate screws.
6. Suitable for installing all international standard skates.
7. Size available : 31-45
8. Blades length: 12.5-17.5 inch 

1. Carbon fiber material for the boot shell
2. Waterproof synthetic leather
3. The distance between front and rear screw holes on the sole is 16.5CM
4. The collar design fits snugly around the ankle
5. Seamless synthetic leather lining with no stitching on the main body
6. Soft material for the shoelace holes, ensuring a tight fit around the ankle
7. Screw holes at the front and back of the sole for attaching the ice blade, 35-47 sizes with a standard international hole spacing of 165MM, 31-34 sizes have a hole spacing of 150MM for ice blade attachment.
8. Suitable for mounting all standard international ice blades.
9. The ankle area can heat moldable 
10. Sizes available: 32-45.

1. Carbon fiber-pressed sole shell for increased torsional rigidity, high strength, and lightweight.
2. Synthetic fiber leather for the upper, 1.2mm thickness. It is resistant to low temperatures, waterproof, and will not deform.
3. The inner lining is seamlessly sewn with full-grain leather.
4. The material at the lace perforation position is soft, allowing for a snug fit around the ankle.
5. There are 7 screw holes at the front and back of the sole to connect with ice blades (or one long slot at the front and back), with a standard international hole spacing of 165mm for sizes 35 to 47, and a distance of 150mm for sizes 31 to 34.
6. Suitable for installing all international standard ice blades.
7. The ankle area can heat moldable 
8. Sizes available: 32 to 45

1. The upper is made of a single piece of super fiber material, elastic fabric, or genuine leather, which is waterproof.
2. The inner lining is wrapped in a whole piece of leather, with a 1.2MM thick cowhide collar around the ankle bone.
3. The sole is composed of 2 layers of Kevlar and 6-8 layers of carbon fiber material.
4. The distance between the front and rear screws on the sole is 165MM, allowing it to be compatible with ice blade products from any international brand.
5. The carbon fiber sole has high strength, torsional resistance, and strong yield strength.
6. 100% heat moldable 
7. Available sizes: 34-45

Katana blade 

suitable for youth weighing 35-55 kilograms Tube main material: 7000 series advanced aviation aluminum Tube hardness: 16.5 degrees Tube yield strength: 115-125 degrees Bi-Metal/PM blade hardness: 61-62HRC (good ice cutting effect) Blade thickness: 1.1MM Ice skate thickness: Radius 9 meters Ice skate curvature: Radius 23 meters

8005 blade

(for athletes weighing less than 45-50 kilograms, capable of supporting a single lap speed of 9 seconds) for all-around ice skating Tube main material: 7000 series advanced aviation aluminum Tube hardness: 17 degrees Tube yield strength: 120-130 degrees Bi-Metal blade hardness: 61-62HRC Blade hardness: 50-52HRC Blade thickness: 1.1MM Ice skate thickness: Radius 9 meters Ice skate curvature: Radius 23 meters

7005AA blade

(for athletes weighing 50-70 kilograms)capable of supporting extreme single lap speed of 8.4 seconds) for all-around ice skating Tube main material: 7000 series advanced aviation aluminum Tube hardness: 16.5 degrees Tube yield strength: 105-110 degrees Bi-Metal blade hardness: 61-62HRC (good ice cutting effect) Blade hardness: 50-52HRC Blade thickness: 1.1MM Ice skate thickness: Radius 9 meters Ice skate curvature: Radius 23 meters

7006AA Blade

(for athletes weighing 70-80 kilograms, capable of supporting extreme single lap speed of 8.1 seconds) for short distance ice skating Tube main material: 7000 series advanced aviation aluminum Tube hardness: 16.5 degrees Tube yield strength: 115-120 degrees Full metal PM blade hardness: 61-62HRC Blade thickness: 1.1MM Ice skate thickness: Radius 9 meters Ice skate curvature: Radius 23 meters

8005-AA blade

(for athletes weighing 60-75 kilograms, capable of supporting extreme single lap speed of 8.3 seconds) for all-around ice skating Tube main material: 7000 series advanced aviation aluminum Tube hardness: 16.0 degrees Tube yield strength: 95-100 degrees Bi-Metal blade hardness: 61-62HRC (good ice cutting effect) Blade hardness: 50-52HRC Blade thickness: 1.1MM Ice skate thickness: Radius 9 meters Ice skate curvature: Radius 23 meters

8006AA Blade

(for athletes weighing over 70 kilograms, capable of supporting extreme single lap speed of less than 8.0 seconds)  for short distance ice skating Tube main material: 7000 series advanced aviation aluminum Tube hardness: 16.0 degrees Tube yield strength: 105-110 degrees Full metal PM blade hardness: 61-62HRC Blade thickness: 1.1MM Ice skate thickness: Radius 9 meters Ice skate curvature: Radius 23 meters